Which pallet racking system is right for my warehouse?

The right system depends on SKU count, pallet turnover, stock rotation (FIFO or LIFO), lift-truck type and clear building height. Selective pallet racking gives 100% direct access for high-SKU operations, while mobile, drive-in and push-back systems trade some selectivity for much higher storage density. A layout study comparing pallet positions, picking time and safety clearances is the most reliable way to decide.

How much extra capacity can mobile pallet racking deliver?

Mobile pallet racking removes all but one working aisle per block, so it can come close to doubling pallet positions compared with conventional selective racking in the same footprint, while keeping access to every pallet. Actual gains depend on building dimensions, column grid and floor conditions.

Can existing racking be upgraded instead of replaced?

Yes. A warehouse retrofit can increase capacity and safety by re-profiling beam levels, adding height, converting areas to high-density or mobile storage, adding mezzanines and integrating semi-automated equipment, often while the site stays operational.

How often should pallet racking be inspected?

European standard EN 15635 recommends an inspection by a technically competent person at least every 12 months, supported by regular in-house visual checks by a trained Person Responsible for Racking Safety. Any damage should be reported and assessed immediately.

Do you support international and system-integrator projects?

Yes. DEXION RACKING supports overseas buyers and system integrators with engineering data, structural calculations, layout drawings, documentation and installation supervision, from feasibility study through to after-sales service and rack inspection.

Pallet Racking & Warehouse Storage Systems | DEXION RACKING

Product Description

Heavy Duty Rack

Heavy duty rack is hooking structured, easy to dismount and install. It can be adjusted by each 75mm based on the goods height, and can load 800-3000kg/layer. Steel plate, wood plate, and MDF can be chosen as the layer board. This kind of rack is an ideal storage rack for small and medium-sized warehouses for its advantages of appropriate height and convenience in accessing goods.

Hooking Structure

Quick to assemble, easy to adjust by 75mm steps

High Load Capacity

800 - 3000 kg / layer (Up to 6000 kg per set)

Custom Decking

Compatible with steel plates, wood plates, & MDF

Technical Specifications

Brand	XINMIAO
Raw-Material	High-Quality Q235 Cold rolled steel
Color	Upright frame is blue, Beam is orange, can be customized.
Standard Size	L2300D1000H4500 and size can be customized according to your requirement
Height	1500-8000mm or Customized
Width / Depth	400-1500mm or Customized
Length	1500-3200mm or Customized
Upright-Section	80601.5/1.8/2.0mm, 90651.5/1.8/2.0mm, 100702.0/2.5mm, 120952.0/2.5mm etc.
Loading Capacity	1000~6000kgs or 2200~13200lbs
Beam-Section	8045mm, 10045mm, 12045mm, 14045mm, 16045mm, 18045mm etc.
Treatment Surface	Powder coated
Packing Term	Air bubble, Wooden Case, etc.